Sable AWD V6-3.5L (2008)
![background image](/mercury/sable_awd/v6-3.5l/Page-2104009.png)
Taurus X (Part 2)
Removal and Installation
1. Remove the lower B-pillar trim panel.
-
Pull the lower B-pillar trim panel toward the center of the vehicle to release the retaining clips.
2. Position the front seat forward.
3. Depower the supplemental restraint system (SRS).
4. Position aside the front and rear door opening weatherstrips.
5. Remove the front safety belt anchor-to-seat nut cover.
-
Pull the top of the cover outward and then lift upward.