Drive Belt: Specifications
- Make
- Mercury
- Model
- Villager
- Engine
- V6-181 3.0L SOHC
- Year
- 1995
- Section
- Drive Belt › Specifications
Drive Belt: Specifications
Alternator belt deflection should be .256-.295 inch for a new belt or .295-.335 inch for a used belt measured by applying 22 lbs. of pressure to belt at a
point midway between alternator and crankshaft pulleys.
Water pump and power steering pump belt deflection should be .31-.39 inch for a new belt or .39-.47 inch for a used belt measured by applying 22 lbs.
of pressure to belt at a point midway between power steering pump and water pump pulleys.
A/C belt deflection should be .16-.24 inch for a new belt or .20-.28 inch for a used belt measured by applying 22 lbs. of pressure to belt at a point
midway between A/C compressor and crankshaft pulleys.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1995 Mercury Villager 3.0L
- PARTOil filterSearch: Mercury Villager 1995 3.0L oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mercury Villager engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.