Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Seat Cushion: Service and Repair
Front/Center Bucket Cover/Pad
REMOVAL
1. Remove the front seat cushion side shield.
2. Remove the four front seat cushion frame and spring bolts.
NOTE: The four front seat cushion frame and spring bolts for a power seat are under the front seat and attach to the armature for the height
adjustment feature.
3. Remove the front seat cushion cover and pad assembly from the front seat cushion frame and spring.
4. Cut the hog rings that attach the front seat cushion cover to the front seat cushion pad.
5. Remove the front seat cushion cover from the front seat cushion pad.
INSTALLATION
1. To install, reverse the removal procedure.
