Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Fuel Gauge Sender: Testing and Inspection
With Electronic Instrument Cluster
Connector Shown From Component Side
1. Remove the fuel pump assembly.
2. Measure the resistance between terminal 3 (+) and terminal 4 (-) of the fuel pump assembly.
3. Adjust the fuel tank float to the positions shown.
4. If the resistances are not as specified, replace the fuel level sensor. If the fuel level sensor is OK, return to the Pinpoint Tests. See: Instrument
Cluster/Testing and Inspection/Pinpoint Tests/Pinpoint Tests (Electronic Instrument Cluster)