Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
REMOVAL
1. Remove the battery.
2. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
3. Remove the air cleaner intake tube bracket bolt.
4. Separate the air cleaner intake tube from the Engine Air Cleaner (ACL).
5. Remove the air cleaner intake tube from the engine air intake resonator No. 1.
INSTALLATION
To install, reverse the removal procedure.
-
Tighten the air cleaner intake tube bracket bolt to 5 Nm (45 in lb).
