Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
7. Remove the intermediate line C bracket bolt.
8. Disassemble the intermediate line C bracket and separate the intermediate line C and the power steering pressure hose.
9. Remove intermediate line C from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
^
Refer to Torque Specifications.
NOTE: Follow the start-up procedure. See: Power Steering Pump/Service and Repair/Power Steering Pump/Start Up Procedure After Power
Steering Pump or Gear Service
Steering Gear to Cooler Line - Intermediate Lines A and B
REMOVAL
NOTE: The removal and installation procedures for intermediate line A and intermediate line B are the same.
1. Remove intermediate hose A.