Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
8. If equipped, raise the speed control servo bracket and remove intermediate line A and intermediate line B.
9. Disassemble the three intermediate line A and intermediate line B clamps.
10. Separate intermediate line A and intermediate line B.
INSTALLATION
1. To install, reverse the removal procedure.
^
Refer to Torque Specifications.
NOTE: Follow the start-up procedure. See: Power Steering Pump/Service and Repair/Power Steering Pump/Start Up Procedure After Power
Steering Pump or Gear Service