Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Windshield Washer Reservoir: Service and Repair
Rear Pump and Reservoir
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the RH wheel.
4. Remove the RH front fender splash shield.
5. Remove the windshield washer reservoir top bolt.
6. Disconnect the windshield washer reservoir fluid level sensor electrical connector.
7. Disconnect the rear window washer pump electrical connector from the rear window washer pump.
8. Disconnect the windshield washer pump electrical connector from the windshield washer pump.
9. Place a suitable drain pan under the windshield washer reservoir and drain the washer fluid.