Villager V6-201 3.3L SOHC VIN T SFI (1999)
Trunk / Liftgate Latch: Service and Repair
Liftgate Remote Control Latch
REMOVAL
1. Remove the liftgate trim panel.
2. Remove the watershield.
3. Disconnect the liftgate latch cables.
1
Remove the bolts.
2
Remove the liftgate latch cable adjusting brackets from the latch remote control.
3
Disconnect the liftgate latch cables from the latch remote control.
NOTE: Mark the position of the liftgate latch cable adjusting brackets before removing the bolts.
4. Release the liftgate exterior handle actuating rod.
5. Release the lock cylinder actuating rod.