Villager V6-201 3.3L SOHC VIN T SFI (1999)
7. Remove the auxiliary A/C evaporator inlet and outlet line retainers.
8. Remove the auxiliary A/C evaporator lines.
1
Remove the retainer screws.
2
Remove the auxiliary A/C evaporator inlet and outlet line peanut fittings.
3
Remove the lines.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Lubricate the new O-ring seal using Motorcraft YN-12b refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B.