Villager V6-201 3.3L SOHC VIN T SFI (1999)
Seat Belt Height Adjuster: Service and Repair
Removal and Installation
REMOVAL
1. Remove the upper B-pillar trim panel.
2. Remove the height adjuster.
1
Remove the bolts.
2
Remove the height adjuster.
NOTE: Height adjuster trim cover removed for clarity.
INSTALLATION
1. Install the height adjuster.
1
Position the height adjuster.
2
Install the bolts.
NOTE: Height adjuster trim cover removed for clarity.
2. Install the upper B-pillar trim panel.