Villager V6-201 3.3L SOHC VIN T SFI (1999)
![background image](/mercury/villager/v6-201_3.3l_sohc_vin_t_sfi/Page-1326005.png)
2
Place the inner race assembly in the outer race.
11. Install the wire ring bearing retainer on the halfshaft joint.
12. Position the boot and clamps over the joint.
13. CAUTION: Tighten the front wheel halfshaft joint boots securely, but not to the point where the boot clamp bridge is cut or damage may result.
Using the special tool, crimp the clamps as necessary.