Hazard warning
- Make
- Mini
- Model
- Mini Electrical Library
- Year
- 1997 model year
- Section
- Indicators and hazard system operation › Hazard warning
Description and operationHazard warning
Hazard warning
When the hazard warning switch is operated, pulsed voltage is switched on an LGK wire from the direction indicator/hazard warning unit on LGK wires to the hazard warning switch. The switch contacts simultaneously connect the pulsed voltage on GR and GW wires to the front and rear indicator lamps, side marker lamps and both instrument pack warning lamps. In addition, the pulsed voltage is switched on an LGG wire to the integral hazard warning lamp. Since the other side of the lamps are permanently connected to earth on B wires the action of the direction indicator/hazard warning unit causes all the connected lamps to flash in unison.
Parts & tools for this job For 1997 Mini Mini
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mini Mini
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.