Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1822005.png)
Hold reservoir vertical using a 4 mm piece of rod as shown in diagram.
Remove anti-roll bar bolts (1) and remove anti-roll bar.
Compliance bush housing to subframe
M14 x 1.5 x 80 ................................................................................................................................................................................................ 165 Nm
Remove bolts (1) securing inner ball joints to subframe.
Remove lower arms complete.
Inner ball joint to subframe
M12 1.5 Screw ................................................................................................................................................................................................ 100 Nm
Remove clips (2) for undertray from subframe.
