Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1837001.png)
Stabilizer Bushing: Service and Repair
Front
Replacing Both Rubber Mounts For Stabilizer Mounting On Front Axle Carrier
Special Tools Required:
^
32 1 190
^
32 3 090
Remove bumper carrier.
Remove road wheels.
Remove left and right bolts holding crush tube to modular front end (1).
Do not release bolts (2).
Modular front end (MFE) to front axle carrier extension legs
M8 x 30 ............................................................................................................................................................................................................. 22 Nm
M6 x 16 ............................................................................................................................................................................................................... 5 Nm
Remove PAS reservoir nuts (1) from bulkhead.
Front strut to knuckle
M12 x 1.5 x 60 .................................................................................................................................................................................................. 81 Nm
Remove nuts and disconnect left and right track rod ends using special tool 32 3 090 (1).
Front strut to knuckle
M12 x 1.5 x 60 .................................................................................................................................................................................................. 81 Nm
