Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1517001.png)
Transmission Mount: Service and Repair
Replacing Gearbox Support Arm
Replacing Gearbox Support Arm
Special tools required:
^
00 0 201
^
00 0 202
^
00 0 205
^
00 0 207
^
00 0 209
^
11 8 260
Turn off ignition.
Remove battery box.
Remove fusebox retaining bolts (1) and move fusebox to one side.
Underbonnet fusebox retaining bolts ............................................................................................................................................................................ 5 Nm
Fit engine support bridge to vehicle.
Use special tools 00 0 201, 00 0 202, 00 0 205, 00 0 207, 00 0 209 and 11 8 260
Tighten support bridge sufficiently to support engine and gearbox weight.
Remove gearbox mount retaining bolt (1).
