Cooper (R56) L4-1.6L (N12) (2008)
Data Link Connector: Service and Repair
61 13 Removing And Installing/Replacing OBD-II Socket
Special tools required:
-
610315
Release screws (1).
Remove OBD-II socket (2) from instrument panel lower section (3).
Remove OBD-II socket cover (2) from OBD-II socket (1). Unlock slide plate (3) with a suitable tool in direction of arrow.
Insert special tool 61 0 315 in OBD-II socket (1) in direction of arrow and press out associated flat spring contact (4). Press remaining flat spring
contacts with special tool 61 0 315 out of OBD-II socket (1).
Installation:
Pay attention to pin assignment of OBD-II socket (1).
Make sure flat spring contacts and slide plate (3) are correctly engaged and seated in OBD-II socket (1).