Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1417002.png)
The brake disc must be removed and cleaned if grease residue is found in the area of the holes for the wheel bolts.
Remove dirt, grease residues and corrosion from contact face (1) with a drill and special tool 36 1 250.
Important!
Do not operate special tool 36 1 250 with an impact screwdriver!
Note:
Degrease contact face with universal cleaner.
Check firm fit of brake disc retaining screw (1).
Important!
On no account must the retaining screw (1) protrude over contact surface (2) between brake disc and disc wheel.
Front axle:
Tightening torque 34 11 1AZ See: Brakes and Traction Control/Specifications/Tightening Torque
Rear axle:
Tightening torque 34 21 1AZ. See: Brakes and Traction Control/Specifications/Tightening Torque
