Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1025001.png)
Seals and Gaskets: Service and Repair
Removing and Installing/Replacing Selector Shaft Radial Seal (AISIN)
24 12 110 Removing and installing/replacing selector shaft radial seal (AISIN)
Special tools required:
^
24 4 280
^
24 4 290
Necessary preliminary tasks:
^
Remove gear position switch
Screw special tool 24 4 280 firmly into radial shaft seal.
Pull seal out of transmission case by means of bolt (1).
Installation:
Coat sealing lips of new radial seal with clean transmission oil.
Drive shaft seal firmly home with special tool 24 4 290.
