Cooper (R56) L4-1.6L (N12) (2008)
Seals and Gaskets: Service and Repair
Removing Radial Shaft Seal of Left Axle Shaft (AISIN)
24 21 220 Removing radial shaft seal of left axle shaft (AISIN)
Special tools required:
^
23 0 490
^
24 4 300
Necessary preliminary tasks:
^
Drain off transmission oil.
^
Remove left axle shaft.
Drive a hole into radial shaft seal using a center punch.
Important!
Do not use a drill as drillings may result in transmission malfunction.
Screw special tool 23 0 490 into radial shaft seal (1).
Drive out radial shaft seal (1) with impact weight (2).
Installation:
Coat sealing lips of new radial seal with clean transmission oil.
Drive shaft seal firmly home with special tool 24 4 300.