Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1030002.png)
Release shim (1), retaining ring (2) and nut (3).
Release bolts (4).
Remove switch.
Installation:
Insert screws (4) slightly.
Fit shim, retaining ring and nut.
Tighten AISIN screw connection, gear position switch
M6 Screw ......................................................................................................................................................................................................... 5.5 Nm
M14 nut ............................................................................................................................................................................................................... 7 Nm
Mount special tool 24 4 270.
Tighten screw (1).
Align position switch to "N".
Tighten down screws (2).
Tighten AISIN screw connection, gear position switch
M6 Screw ......................................................................................................................................................................................................... 5.5 Nm
M14 Nut .............................................................................................................................................................................................................. 7 Nm
Installation:
Connect gear position switch plug
