Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1221002.png)
Tightening torque 23 11 10AZ See: Case/Specifications.
Drive a hole into radial shaft seal (1) using a center punch.
Screw special tool 23 0 490 See: Tools and Equipment/Manufacturer Tools/23 0 490 Extractor into hole and drive out seal with impact weight (2).
Important!
Do not use a drill as drillings may result in transmission malfunction.
Remove retainer (1) from ball pin.
Fit new radial shaft seal on special tool 23 0 350 See: Tools and Equipment/Manufacturer Tools/23 0 350 Drift and drive in.
