Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1221003.png)
Install retainer (1) in release lever (2).
Push release bearing (3) with release lever (2) onto guide bush.
Press retainer (1) firmly onto ball pin until it engages.
Installation:
Lubricate sealing lip of seal with clean gear oil.
Replace retaining screws of guide bush.
Lubricate toothing of input shaft and ball pin Operating Fluids.
Tightening torque 23 11 10AZ See: Case/Specifications.
