mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Trim on A-Pillar, Left or Right|Page 14517 > < Body - Rear Side Window Scratched
Page 1
background image

Windshield Moulding / Trim: Service and Repair
Removing and Installing/Replacing Trim on A-Pillar, Left or Right

51 31 045 - Removing and installing/replacing trim on A-pillar, left or right

Important!

After cementing the windscreen, at least 6 hours must be allowed to elapse before fitting the A-pillar trim covers (windscreen breakage).

Release door seal in A-pillar area.
Release screws (1 and 2).
Unclip trim (starting at bottom) in direction of arrow.

Installation Note:

Trim for A-pillar:
-

must be behind lower trim strip of windscreen

-

must not be damaged, replace if necessary

If necessary, release clips (2) from A-pillar (1).

Removing and Installing/Replacing Trim on A-Pillar, Left or Right|Page 14517 > < Body - Rear Side Window Scratched