Cooper Convertible (R57) L4-1.6L (N12) (2009)
Cylinder Head Gasket: Service and Repair
11 12 101 - Replacing cylinder head gasket (N12)
Special tools required:
-
11 4 470
Necessary preliminary tasks:
-
Remove cylinder head See: Cylinder Head Assembly/Service and Repair/Removal and Replacement.
Remove remnants of oil and dirt from pocket holes (1).
Important!
Work on sealing face on engine block and on cylinder head with special tool 11 4 470 only.
Do not use any metal-cutting tools.
Note:
Illustration shows N52.