mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Condenser HVAC|Service and Repair|Page 6540 > < Compressor Clutch Relay|Locations
Page 1
background image

Condenser HVAC: Service and Repair

64 53 550 - Removing and installing or replacing condenser for A/C system

Warning!

Risk of injury!
Refrigerant circuit is under high pressure and must be fully depressurized before any work is carried out!
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling R 134a refrigerant.
Follow safety instructions for handling refrigerant oil See: Service and Repair/Procedures/Instructions for Handling Refrigerant Oil (for Refrigerant R
134a).

Important!

Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow instructions See: Service and Repair/Removal and Replacement for opening and replacing parts in refrigerant circuit!
If A/C system is opened for more than 24 hours:Replace desiccant insert for A/C system

Necessary preliminary tasks:

-

Drawing off, evacuating and filling the A/C system See: Service and Repair/Procedures/Drawing off, Evacuating and Filling A/C System (R 134a)
are not included in the time value given for this work operation

-

Remove front bumper trim

Release screws (1).
Disconnect pressure and suction lines.

Condenser HVAC|Service and Repair|Page 6540 > < Compressor Clutch Relay|Locations