mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Replacing Control Unit for Left Xenon Headlight|Page 332 > < Replacing Control Unit for Left Xenon Headlight|Page 330
Page 1
background image

Headlamp Igniter Module: Service and Repair
Replacing Ignition Unit for Left Xenon Headlight (with Xenon Bulb)

63 12 870 - Replacing ignition unit for left xenon headlight (with xenon bulb)

Warning!

Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply
(lighting system and ignition off).
Work on the entire xenon lighting system (control unit, ignition unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights) See: Lighting and Horns/Service and Repair/Instructions for Handling Light Bulbs
(Exterior Lights).

Important!

Ignition unit and xenon bulb are viewed as a single component and must not be separated.

Unlock retaining tab (1) and remove cover (2) from headlight.

Installation Note:

Make sure cover (2) is correctly seated on headlight. 

Replacing Control Unit for Left Xenon Headlight|Page 332 > < Replacing Control Unit for Left Xenon Headlight|Page 330