mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Stabilizer Bushing|Front|Page 10634 > < Stabilizer Bushing|Front|Page 10632
Page 2
background image

M10 x 1.25 x 12 Locknut ..................................................................................................................................................................................  52 Nm
Note: Use only once.

Disconnect left and right stabilizer lower links to stabilizer bar (1).

Front anti-roll bar link to anti-roll bar

M10 x 1.5 ..........................................................................................................................................................................................................  56 Nm
Note: use only once.

Remove the nuts and disconnect left and right lower arm to knuckle ball joints using special tool 32 1 190 

Outer ball joints to lower arm

M12 x 1.5 Nut ...................................................................................................................................................................................................  56 Nm
Note: Use only once.

Remove nut (1) and remove bolt. 

Disconnect steering column from rack. 

Release steering column in direction of arrow.

Replace self-locking nut. 

Lower universal joint clamping nut

M8 Nut ..............................................................................................................................................................................................................  22 Nm
Note: Use only once

Stabilizer Bushing|Front|Page 10634 > < Stabilizer Bushing|Front|Page 10632