Cooper S (R53) L4-1.6L SC (W11) (2004)
Remove engine lower stabilizer (2) retaining bolts (1) from engine and subframe.
Lower stabilizer to oil sump holder ........................................................................................................................................................................... 100 Nm
Lower stabilizer to front axle .................................................................................................................................................................................... 100 Nm
Locate gearbox hydraulic jack (1) to subframe jacking point (2)
Remove left and right front subframe center bolts (1) to body.
Front subframe centre to body
M12 x 1,75 x 18 .............................................................................................................................................................................................. 100 Nm
Note: Self forming.
Remove bolts (1) retaining left and right compliance bush housing (2) to body.
Compliance bush housing to body
M10 Screw ..................................................................................................................................................................................... 59 Nm + 90° ± 15°
Caution: Ensure transmission jack is supporting subframe.