mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 9576 > < Diagram Information and Instructions|Page 9574
Page 3
background image

The LED only lights up with convertible top movement, not with movement of the folding sun roof.

LED lights up:

-

during convertible top movement if no block condition is set

LED flashes:

-

Convertible top in a safe end position (a Check Control message also appears in the instrument cluster)

-

Convertible top in safe end position and one or a number of block conditions have been set (a yellow Check Control symbol also appears in the
instrument cluster: e.g. back shelf not lowered or driving speed greater than 30 km/h)

Convertible top drive unit

The convertible top drive unit (motor with hydraulic pump and valve block) drives all convertible top movements via cylinder pair. The cylinder pair
moves the main pillars of the convertible top.

The direction of movement of the convertible top (OPEN or CLOSED) is controlled by 2 relays. The cylinders are supplied with oil by a hydraulic pump
with 2 directions of rotation. The reversal of the direction of rotation of the hydraulic pump determines the direction of movement.

The hydraulic unit is secured with a slow-response fuse of 40 Amperes.

A "pump protection counter" is implemented in the convertible top module (CVM) to protect the hydraulic unit.

Diagram Information and Instructions|Page 9576 > < Diagram Information and Instructions|Page 9574