Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Spoiler: Service and Repair
51 71 412 Removing And Installing/Replacing Rear Spoiler
Special tools required:
-
51 0 300
Lever out seal plugs (1) and release nuts underneath.
Tightening torque
7AZ Rear spoiler to rear lid.............................................................................................................................................................................................4 Nm.
Type: R56
Detach rear spoiler (1) in upward direction from clips (2).
Installation:
If necessary, replace faulty clips (1).
Studs (2) and seals (3) must not be damaged.
