Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Necessary preliminary tasks:
^
Read and comply with General Information.
^
Remove rear left or right wheel
Note:
After completing tasks, bleed brake system
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are reconnected.
This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.
Detach locking clip (1) in direction of arrow.
Disengage parking brake Bowden cable (2) from actuating lever (3) at brake caliper.
Feed out parking brake Bowden cable (2) downwards.
Important:
Grip brake hose at square head (2) so that connecting piece cannot rotate in retaining bracket.
Disconnect brake hose from brake line (1).
Installation:
Tighten brake line screw connections
1AZ Brake line screw connections
M10 x 1 ............................................................................................................................................................................................................. 14 Nm
M12 x 1 ............................................................................................................................................................................................................. 14 Nm