Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-518001.png)
Muffler: Service and Repair
Front Muffler
18 12 040 Removing and installing/replacing front muffler (N12, N14)
Special tools required:
^
00 2 210
Warning:
Scalding hazard!
Only perform these tasks after exhaust system has cooled down.
Unfasten clip.
Tighten V-band clamp, exhaust system, to catalytic converter
5AZ V-band clamp, exhaust system, to catalytic converter ..................................................................................................................................... 25 ±3
Nm
Cutting line (1) for front muffler is designated by a notch in the pipe.
Cut exhaust pipe with special tool 00 2 210 at marked point and deburr.
Important:
Risk of damage!
Secure exhaust pipe of rear muffler against falling down.
