3000GT V6-3.0L SOHC (1998)
Antenna Motor: Component Tests and General Diagnostics
Antenna Motor Check
Disconnect the motor antenna control unit connector, connect the positive terminal of the power supply to terminal (1) and connect the negative terminal
to terminal (4) to check that the antenna goes up, and that when the connections are reversed, the antenna goes down.
Antenna Motor Control Unit Check
1. Connect the harness connector to the motor antenna. (Body harness)
2. Disconnect the antenna motor connector.
3. With the ignition switch in the ACC or ON position, operate the radio switch and check the voltage between the terminals during the period when
the antenna is going up or going down.