3000GT V6-3.0L SOHC (1998)
Brake Drum: Testing and Inspection
Brake Drum Inside Diameter Check
BRAKE DRUM INSIDE DIAMETER CHECK
1. Remove the rear brake assembly, and support it by a wire, etc.
2. Remove the brake disc.
3. Measure the inside diameter of the hub and drum at two or more locations.
Standard value: 168.0 mm (6.6 inch)
Limit: 169.0 mm (6.7 inch)
Replace brake drums and shoe and lining assemblies when wear exceeds the limit value or is badly out of balance.