3000GT V6-3.0L SOHC (1998)
4. Rotate intermediate link C in the direction shown until it is blocked by the stopper, turn down adjusting nut C in the direction that the free
travel of the inner cable is reduced, and back off adjusting nut C the specified number of turns just before intermediate link C begins to move.
Amount adjusting nut C is to be backed off:
M/T About 1/2 turn [inner cable free travel 0 - 1 mm (0 - 0.04 in.)]
A/T About two turns [inner cable free travel 2 - 3 mm (0.08 - 0.12 in.)]
5. Secure the accelerator cable with the lock nut.
6. Turn down adjusting nut B in the direction that the free travel of the inner cable of the throttle cable is reduced. At the position where the lever
of intermediate link B is brought into contact with intermediate link C, back off adjusting nut B the specified number of turns.
Amount adjusting nut B is to be backed off:
About one turn [inner cable free travel 1 - 2 mm (0.04 - 0.08 in.)]
7. Secure the throttle cable with the lock nut.
8. Secure the adjusting bolt of the intake manifold plenum.
9. Turn down adjusting nut A in the direction that the free travel of the inner cable of the cruise control cable is reduced. At the position where
the lever of intermediate link A is brought into contact with intermediate link B, back off adjusting nut A the specified number of turns.
Amount adjusting nut A is to be backed off:
About one turn [inner cable free travel 1 - 2 mm (0.04 - 0.08 in.)]