3000GT V6-3.0L SOHC (1998)
Fuel Pressure Release: Service and Repair
Make the following operations to release the pressure remaining in fuel pipe line so that fuel will not flow out.
(1) Remove the fuel gauge cover in the luggage compartment.
(2) Disconnect the fuel pump harness connector.
(3) Start the engine and after it stops by itself, turn the ignition switch to OFF.
(4) Connect the fuel pump harness connector.
(5) Apply the specified sealant to the rear floor pan.
Specified sealant: 3M ATD Part No.8509 or equivalent
(6) Install the fuel gauge cover.
