3000GT V6-3.0L SOHC (1998)
Refrigerant: Testing and Inspection
The sight glass is a refrigerant level indicator. To check the refrigerant level, clean the sight glass and start the vehicle engine. Push the air conditioning
button to operate the compressor, place the blower switch to high and move the temperature control lever to MAX. COOL. After operating for a few
minutes in this manner, check the sight glass.
1. If the sight glass is clear, the magnetic clutch is engaged, the compressor discharge line is warm and the compressor inlet line is cool; the system
has a full charge.
2. If the sight glass is clear, the magnetic clutch is engaged and there is no significant temperature difference between compressor inlet and discharge
lines; the system has lost most of its refrigerant charge.
3. If the sight glass shows foam or bubbles, the system could be low on refrigerant or the receiver drier is restricted. The system has to be tested, leak
checked then recharged with refrigerant.
