3000GT V6-3.0L SOHC (1998)
>A< O-ring / Inlet Water Pipe Installation. <Vehicles With Automatic Transaxle>
Insert the O-ring to the water inlet pipe, and coat the outer portion of the O-ring with water.
By coating with water the insertion to the water pump will become easier.
CAUTION: Care must be taken not to permit engine oil or other grease to adhere to the O-ring.
Do not fold over or scratch the O-ring during installation.
>B< O-ring / Inlet Water Pipe A Installation <vehicles With Manual Transaxle>
Insert the O-ring to the water inlet pipe A, and coat the outer portion of the O-ring with water.
By coating with water, the insertion to the water pump will become easier.
CAUTION: Care must be taken not to permit engine oil or other grease to adhere to the O-ring.
Do not fold over or scratch the Wring during installation.
>C< O-ring / Inlet Water Pipe B Installation. <Vehicles With Manual Transaxle>
Insert the O-ring to the water inlet pipe B. and coat the outer portion of the O-ring with water.
By coating with water, the insertion to the water pump will become easier.
CAUTION: Care must be taken not to permit engine oil or other grease to adhere to the O-ring.
Do not fold over or scratch the O-ring during installation.
Post-installation Operation
-
Engine Coolant Supplying.
-
Timing Belt Installation.