3000GT V6-3.0L SOHC (1998)
Air Bag(s) Arming and Disarming: Vehicle Damage Warnings
If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting, etc., follow the appropriate procedure.
CAUTION:
1. SRS components should not be subjected to heat over 93°C (200°F), so remove the SRS-ECU, air bag modules and clock spring before drying or
baking the vehicle after painting. Recheck SRS system operability after reinstalling them.
2. If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until
they are reinstalled.
