mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Evaporator Temperature Sensor / Switch > < Cabin Temperature Sensor / Switch|Locations|Page 369
Page 1
background image

Compressor Speed Sensor: Testing and Inspection

Measure the resistance between terminals (2) and (5) of the connector.

Normal resistance: 405 ± 35 Ohms  when ambient temperature is 20 °C (68 °F) 
If the measurement deviates greatly from the above resistance, replace the revolution pick-up sensor assembly.

Evaporator Temperature Sensor / Switch > < Cabin Temperature Sensor / Switch|Locations|Page 369