3000GT V6-3.0L SOHC (1998)
2. Measure the clutch pedal stroke.
Standard value: 160 mm (6.29 inch) or more
If the clutch pedal stroke deviates from the standard value, turn the push rod to adjust the stroke.
3. Return the clutch pedal gradually from its full-stroke position to measure amount of the return made by the pedal until the interlock switch makes
an operating sound.
Standard value: 10-15 mm (0.394-0.591 inch)
If the amount of pedal return deviates from the standard value, adjust it by loosening the lock nut and turning the interlock switch.
4. Measure the clutch pedal clevis pin play.
Clutch pedal clevis pin play
Standard value: 1-3 mm (0.04-0.12 inch)
If the clutch pedal clevis pin play is outside the standard value, adjust with the push rod.
CAUTION: Do not push in the master cylinder push rod at this time.
5. Measure pedal play. In the case of AWD vehicles, depress the pedal 2 or 3 times to eliminate booster negative pressure with the engine stopped
and then push the pedal with a finger to measure the play.
Clutch pedal play
Standard value:
<FWD> 6-13 mm (0.24-0.51 inch)
<AWD> 12-20 mm (0.49-0.79 inch)
