3000GT AWD V6-2972cc 3.0L DOHC Turbo (1991)
Stabilizer Bar: Service and Repair
FWD Models
Fig. 15 Replacing Stabilizer Bar
Fig. 16 Installing Stabilizer Link
Fig. 17 Aligning Stabilizer Bracket
Replace stabilizer bar in numbered sequence shown in Fig. 15, noting the following when installing:
1.
Hold stabilizer link ball studs with wrench and install self-locking nuts (A), Fig. 16.
2.
Holding stabilizer bar link with wrench, tighten self-locking nut (B) so that protrusion of stabilizer link is within .197-.276 inch.
3.
Align left frame bushing with stabilizer bar marking end and temporarily tighten stabilizer bar bracket, Fig. 17.
