mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Wiper and Washer Systems > < Windshield - Spacers Redesigned & Added To The Side
Page 2
background image

When replacing the windshield on a 1991 300OGT, two important changes in the installation procedure must be followed.

1.

Replace the existing windshield spacers with the re-designed spacers.

2.

Add the new windshield side spacers before installing the replacement windshield.

For complete information concerning windshield replacement on the 1991 3000GT, refer to the 1992 3000GT Service Manual, pages 42-29 through
42-32.

Also, revise page 42-28 of the 1991 3000GT Service Manual with a note that refers to the reader to the 1992 3000GT Service Manual for the revised 
windshield replacement procedure. An example of this revision is shown on the illustration.

PARTS INFORMATION

The re-designed windshield spacers and new windshield side spacers are available through your Regional PDC. Part numbers are:

MB645400: Windshield Spacer (2 per vehicle required)

MB646553: Windshield Side Spacer (2 per vehicle required)

WARRANTY INFORMATION

Position Code:

423121 10

Prior Work Authorization (PWA) is required for windshield replacement.

Utilize standard warranty procedures.

Wiper and Washer Systems > < Windshield - Spacers Redesigned & Added To The Side