3000GT AWD V6-2972cc 3.0L DOHC Turbo 24 Valve (1996)
Heater Core: Service and Repair
1. Drain coolant into a suitable container and disconnect heater hoses.
2. Remove center console and instrument panel as outlined under Instrument Panel.
Fig. 32 Exploded View Of Heater Unit
3. Remove center reinforcement, Fig. 32.
4. Remove lower cover, foot shower, distribution and lap cooler ducts.
5. On models with A/C, remove evaporator assembly as outlined under Evaporator Core.
6. Remove center duct.
7. To prevent bolts from falling into blower assembly, set air selection damper to outside air induction position.
8. Remove heater unit assembly.
9. Remove plate from heater unit.
10. Remove heater core from heater unit. Use caution not to damage heater core fins or pad part of heater core.
11. Reverse procedure to install.
