3000GT AWD V6-2972cc 3.0L DOHC Turbo 24 Valve (1996)
Fig. 16 Rear Exhaust Manifold Nut Installation
a. Torque nuts marked A to 22 ft. lbs., Fig. 16.
b. Torque nuts marked B to 34-38 ft. lbs.
c. Back off nuts marked B until a torque of 7 ft. lbs. is reached.
d. Torque nuts marked B to 21-22 ft. lbs., Fig. 16.
e. Install cone disc spring with grooved side facing up, then the nut, cone disc spring and washer in direction shown.
4. With the exhaust manifold stay resting on exhaust manifold, fit it along manifold over studs.
5. Install front exhaust manifold nuts in the following order:
