3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
Throttle Position Sensor: Adjustments
Throttle Position Sensor Location
1. Disconnect the throttle position sensor connector.
Idle Position Switch, Continuity Check
2. Using jumper wires, connect an ohmmeter across terminals 3 (idle position switch) and 4 (sensor ground) of the connector.
Idle Switch Continuity Check, Set-up
3. Insert a .065 mm feeler gauge between the fixed SAS and the throttle lever.
Idle Switch Check For Continuity
4. Loosen the throttle position sensor mounting bolts and turn the TPS body fully counter clockwise.
5. Check for continuity across terminals 3 and 4. There should be continuity.