3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
![background image](/mitsubishi/3000gt_convertible_awd/v6-2972cc_3.0l_dohc_turbo/Page-1341002.png)
Throttle Body Installation, Gasket Alignment
1. Install a new gasket. Poor idle will result if the gasket is not installed with the proper orientation.
2. Install the throttle body and torque the bolts, in a cross-pattern.
Torque value: 10 - 13 Nm (7 - 9 ft.lbs.)
3. Reconnect the throttle cable (and cruise control cable, if equipped).
4. Reconnect the intake air duct.
5. Adjust the throttle position sensor and the idle speed screw if needed.