3000GT Convertible AWD V6-2972cc 3.0L DOHC Turbo (1995)
Fig. 37 Trailing Arm Connecting Rod Replacement
c. Install rod remover and installer tool No. MB9911254, or equivalent, as shown in Fig. 37.
d. Apply lubricant to sliding points (A). Install bolt (B) in trailing arm.
e. Using a suitable wrench, turn screw (C) to remove connecting rod.
Fig. 39 Trailing Arm Assembly
f.Installation of special tool should be performed with screw shaft and guide shaft center lines oriented as shown, Fig. 38.
g. Apply soapy water to rubber portion of connecting rod, then reverse procedure to install connecting rod.
3. Reverse procedure to install.