3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
Wheel Speed Sensor: Service and Repair
REMOVAL
Pre-removal Operation:
-
Splash Shield Removal.
Follow removal steps outlined in illustration.
Removal Service Points
<A> Front ABS Rotor / Rear ABS Rotor Removal.
CAUTION: Do not damage ABS rotor teeth and never drop the ABS rotor. If the ABS rotor has missing teeth or is deformed, accurate wheel
speed detection cannot be expected and the system may fail to function normally. Use particular care in handling the fr4ont ABS rotor as it cannot
be disassembled.
<B> Front Speed Sensor / Rear Speed Sensor Removal.
CAUTION: When removing the speed sensor from the knuckle, be careful not to strike the tip of the pole piece against the ABS rotor teeth or
any other parts.
INSPECTION
Speed Sensor Check
1) Check the tip of the speed sensor pole piece for deposits of metal or other foreign matter and clean the pole piece as necessary.
Also check the pole piece for damage and replace if damaged.
CAUTION: The speed sensor pole piece is magnetized by a built-in magnet inside the sensor, so it tends to attract metal. If the pole piece is
